Block Paving Layer in Lickey Hills

Block Paving Layers in Lickey Hills — what to expect

Householders across the Lickey Hills area, from the winding lanes near the common down towards the B45 postcode district, will find that a properly installed block paving driveway is as much about the unseen preparation as the finished surface. Local installers in this part of Worcestershire typically begin by excavating to the correct depth, then laying a compacted sub-base before a screeded grit sand bed is struck off to receive the blocks. Whether the chosen effect is a traditional herringbone bond for maximum structural strength or a simpler stretcher bond for a clean, linear look, the tegula blocks are laid with care to minimise cutting and wastage. Edge courses are then concrete-haunched to lock the whole field in place, and a final pass with a plate compactor settles the blocks firmly into the sand below. Over time, a drive can become uneven or sink, and that is where a lift and relay service proves its worth; a reputable local firm will carefully remove the blocks, re-grade the sub-base, and re-lay the surface so that it drains properly and sits level once again. After the re-laying is done, attention turns to the joints, where kiln-dried jointing sand is brushed into the gaps and vibrated down to fill every crevice, a job that can also be completed with polymeric jointing for added durability against weeds and ants. Finally, a quality sealing treatment can be applied to protect the colour and suppress moss growth, which is particularly useful in the damp woodlands that surround the Lickey Hills. Residents typically find that a sensible approach is to check a few local quotes before committing, as the skill of the installer across all these stages makes a real difference to the longevity of the drive.