Block Paving Layer in Kennerleigh

Block Paving Layers in Kennerleigh — what to expect

For homeowners in Kennerleigh, the long Devon lanes and soft, rain-laden skies place particular demands on any block paving installation, and the local installers who work around the EX17 district understand that a proper job begins well before the first tegula block is laid. A typical project starts with the excavation and preparation of a stable sub-base, followed by a screeded grit sand bed that is carefully levelled to receive the blocks in a herringbone bond or a simpler stretcher bond, depending on the driveway’s intended use and drainage requirements. The edges are then secured with concrete-haunched edge courses, which give the whole surface the rigidity it needs to resist the seasonal movement of clay-rich soil. Once the blocks are in place, the surface is swept with kiln-dried jointing sand, which is worked into the narrow gaps before a plate compactor passes over the entire area to lock everything together. Over time, however, even the best-laid driveways in Kennerleigh can sink or develop moss in the joints, especially after a wet winter, and this is where a lift and relay service becomes useful. Rather than replacing the whole area, contractors carefully lift the affected blocks, re-level the underlying layers, and then re-lay them in their original pattern, finishing with fresh polymeric jointing that hardens to resist weed growth and ants. Sealing is another step often requested in this part of Devon, as a quality sealer protects the sand and the block colour from the relentless damp, though it is not always essential on every driveway or path. Those who live in the village itself or the scattered lanes around Kennerleigh will find that such work is best assessed on site, as the ground conditions vary from plot to plot. For a calm, practical approach, it is worth inviting a couple of local installers to look over the job and compare quotes before any commitment is made.