Block Paving Layer in Over Burrows

Block Paving Layers in Over Burrows — what to expect

In Over Burrows, the quiet lanes and farm tracks of this Derbyshire corner often call for a properly installed block paving driveway or garden path, and local contractors are well-versed in laying everything from a classic herringbone bond to a simpler stretcher bond, depending on the effect and load-bearing required. The standard approach for a new installation begins with a well-compacted sub-base, followed by a screeded grit sand bed onto which tegula blocks are placed, with the edges secured by concrete-haunched edge courses to keep everything locked firmly in place over the years. Jointing is then carried out with kiln-dried jointing sand brushed into the narrow joints, after which a plate compactor is run over the surface to settle the blocks into the bed and vibrate the sand down to the base of the joints. For those with older surfaces in Over Burrows that have sunk or developed uneven dips, a lift and relay service is often the most practical remedy, where the existing blocks are carefully taken up, the sub-base re-levelled and compacted, and the same pavers reused to avoid the cost of new materials. A more modern alternative, polymeric jointing, is also available and is favoured for its resistance to weed growth and ant activity, though it does require a dry day and a careful wash-down after application to avoid leaving a film on the face of the blocks. Sealing a pave surface, whether after a fresh lay or a relay, can further protect against oil stains and moss, and most local installers will offer a thorough clean and seal as an optional finale. Anyone in Over Burrows with a tired frontage or an uneven back courtyard will find it worth a gentle enquiry to establish what might be involved, and a quiet comparison of a few local quotes will usually reveal a fair sense of the going rate for the work in the area.